LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Hybrid Motor System (Diagnostic Trouble Codes (DTCS) P0A02-U1002) (Hybrid)) >> DTC Diagnosis >> DTC P324C: Drive Motor A Inverter Current >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • "DIAGNOSIS PROCEDURE " must be performed before starting "DTC CONFIRMATION PROCEDURE".
  • Always drive vehicle at a safe speed.

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2. 

  2. CHECK DTC DETECTION

    1. Set the vehicle to READY and wait for 10 seconds or more.
    2. Fully open the accelerator and drive the vehicle by motor.
    3. Stop the vehicle.
    4. Check DTC.

    Is "P324C" detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO-1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals