DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

DTC REPRODUCTION PROCEDURE

With CONSULT
1. Turn the ignition switch OFF and wait for at least 10 seconds.
2. Set the vehicle to READY state or start the engine.
  CAUTION:
  Never drive the vehicle.
3. Perform self-diagnosis for "DAST 1".
Is DTC "C13D8 - 00" detected?

YES

Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

NO - 1

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2

Confirmation after repair: INSPECTION END