Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THE ANGLE SENSOR

Turn the ignition switch OFF.
Disconnect force motor angle sensor harness connector.

Check continuity between motor angle sensor connector terminals.

Force motor angle sensor		Continuity
Terminal		Continuity
1	2	Not existed
1	4	Not existed
1	5	Existed
1	6	Not existed
1	8	Not existed
2	4	Not existed
2	5	Not existed
2	6	Existed
2	8	Not existed
4	5	Not existed
4	6	Not existed
4	8	Existed
5	6	Not existed
5	8	Not existed
6	8	Not existed

Is the inspection result normal?

YES

INSPECTION END

Force motor angle sensor is malfunction. Replace steering column assembly. Refer to REMOVAL AND INSTALLATION .