Component Function Check
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM COMPONENT FUNCTION CHECK (1)
- Turn ignition switch ON.
- Perform On Board Diagnosis Function, and then check steering switch input signal. Refer to ON BOARD DIAGNOSIS FUNCTION .
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO STEP 2.
- PERFORM COMPONENT FUNCTION CHECK (2)
With CONSULT
Check "Self Diagnostic Result" of "MULTI AV".
Is DTC U1300 detected?
YES
Refer to DTC DESCRIPTION .
NO
Refer to DIAGNOSIS PROCEDURE .