Application Item
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT can display each diagnostic item using the diagnostic test modes shown as per the following:
| Test mode | Function |
|---|---|
| Ecu Identification | Displays VSP control unit part number |
| Self Diagnostic Results | Displays the name of a malfunctioning system stored in the VSP control unit |
| Data Monitor | Displays VSP control unit input/output data in real time. |
| Active Test | Gives a drive signal to a load to check the operation. |
NOTE:
The approaching vehicle sound for pedestrians (VSP) system sound may not be activated when diagnosing VSP control unit by using CONSULT.