LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Unlock Sensor >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "UNLK SEN-DR" in "DATA MONITOR" mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    UNLK SEN -DR Driver door Lock OFF
    Unlock ON

    Is the inspection result normal?

    YES 

    Unlock sensor is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals