LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Trunk Lid Opener Request Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "REQ SW -BD/TR" in "DATA MONITOR" mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    REQ SW -BD/TR Trunk lid opener request switch Pressed On
    Released Off

    Is the inspection result normal?

    YES 

    Trunk lid opener request switch is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals