Diagnostic Test

1. Turn Ignition Switch OFF.
2. Disconnect IPDM E/R connector and Oil Pressure Switch connector.
3. Check continuity between IPDM E/R Harness Connector and Oil Pressure Switch Harness Connector.

   IPDM E/R		Oil Pressure Switch		Continuity
   Connector	Terminal	Connector	Terminal
   E7	75	F37	1	Existed

4. Check continuity between IPDM E/R Harness Connector and ground.

   IPDM E/R		Ground	Continuity
   Connector	Terminal
   E7	75		Not existed

Is the inspection result normal?

YES 

INSPECTION END

NO 

Repair harness or connector.