Physical Values

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output	Condition		Value (Approx.)
1 (W)	5 (B)	AC output 2	Output	Ignition switch ON	AC 120V outlet main switch OFF	0V
					AC 120V outlet main switch ON (Using circuit tester)	AC 120V
					AC 120V outlet main switch ON (Using oscilloscope)	Reference value Courtesy of NISSAN NORTH AMERICA, INC. AC 120V
4 (W)	Ground	Battery power supply	Input	Ignition switch OFF		Battery voltage
5 (B)	1 (W)	AC output 1	Output	Ignition switch ON	AC 120V outlet main switch OFF	0V
					AC 120V outlet main switch ON (Using circuit tester)	AC 120V
					AC 120V outlet main switch ON (Using oscilloscope)	Reference value Courtesy of NISSAN NORTH AMERICA, INC. AC 120V
6 (W)	Ground	AC 120 V outlet main switch	Input	Ignition switch ON	AC 120V outlet main switch OFF	0V
6 (W)		AC 120 V outlet main switch	Input	Ignition switch ON	AC 120V outlet main switch ON	12V
7 (G)		AC 120 V outlet main switch	Output	Ignition switch ON	AC 120V outlet main switch OFF	0V
7 (G)		AC 120 V outlet main switch	Output	Ignition switch ON	AC 120V outlet main switch ON	5.2V
8 (B)		Ground	-	Ignition switch ON		0V

CAUTION:

To measure AC 120V output signal, always use the circuit tester or oscilloscope AC range.
Never allow the probes to contact each other.
Because of modified sine wave output of the AC 120V output signal, voltage cannot be measured accurately without using a circuit tester that can measure true RMS (root mean square).