Detailed Flow
- INTERVIEW FOR MALFUNCTION
Interview the customer about the symptom.
GO TO STEP 2 .
- SYMPTOM CHECK
Check the symptom from the customer's information.
GO TO STEP 3 .
- FAIL-SAFE ACTIVATION CHECK
Check that the symptom is a fail-safe condition.
Is fail-safe activated?
YES
GO TO STEP 4 .
NO
GO TO STEP 5 .
- SYSTEM DIAGNOSIS
Perform diagnosis for the fail-safe activated system. Specify the malfunctioning component.
GO TO STEP 6 .
- SYMPTOM DIAGNOSIS
Perform symptom diagnosis. Specify the malfunctioning component.
GO TO STEP 6 .
- MALFUNCTIONING COMPONENT REPAIR
Repair or replace the malfunctioning component.
GO TO STEP 7 .
- REPAIR CHECK (OPERATION CHECK)
Check operation of AC 120V outlet.
Does the outlet operate normally?
YES
Inspection End.
NO
GO TO STEP 3.