Diagnosis Procedure
- PERFORM THE SELF-DIAGNOSIS
- Start the engine.
- Turn the Blind Spot Intervention system ON, and then wait for 30 seconds or more.
- Perform "All DTC Reading" with CONSULT.
- Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR RIGHT".
Is "U1000" detected as the current malfunction?
YES
Refer to TROUBLE DIAGNOSIS FLOW CHART .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: INSPECTION END