Diagnosis Procedure
- CHECK SELF - DIAGNOSIS RESULTS
With CONSULT
Check if any DTC other than "B1276 - 55" is detected in "Self Diagnostic Result" of "METER/M&A".
Is any DTC detected?
YES
Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC INDEX .
NO
GO TO STEP 2 .
- CHECK NUMBER OF ENTRIES IN SERVICE MEMORY
Check "Index servicememory" in "DATA MONITOR". Refer to REFERENCE VALUE .
NOTE:The service memory contains fewer than 47 entries.
Does the service memory contain more than 47 entries?
YES
GO TO STEP 3 .
NO
INSPECTION END
- PERFORM DTC CONFIRMATION PROCEDURE AGAIN
- Erase DTC.
- Perform DTC confirmation procedure again. Refer to DTC DESCRIPTION .
Is DTC "B1276 - 55" detected as the current malfunction?
YES
Replace combination meter. Refer to REMOVAL AND INSTALLATION .
NO
INSPECTION END