Application Items
CONSULT can perform the following diagnosis modes via CAN communication and the combination meter.
| System | Diagnosis mode | Description |
|---|---|---|
| METER/M&A | Self Diagnostic Result | The combination meter checks the conditions and displays memorized errors. |
| Data Monitor | Displays the combination meter input/output data in real time. | |
| Work Support | Displays diagnosis procedure of each work item. | |
| Active Test | Operation of electrical loads can be checked by sending driving signal to them. | |
| ECU Identification | The combination meter part number is displayed. | |
| Configuration | Automatically writes the vehicle specification when replacing combination meter. |