Physical Values

Terminal No. (Wire Color)		Description		Condition			Value (Approx.)
+	-	Signal Name	Input/ Output
1 (B)	Ground	Ground	-	-	-		0 V
6 (GR)	Ground	Stop/start OFF Switch indicator signal	-	Ignition Switch ON	Stop/start OFF Switch indicator ON		0 V
					Stop/start OFF Switch indicator OFF		12 V
7 (G)	Ground	Security signal	Input	Ignition Switch OFF	Security indicator ON		0 V
					Security indicator OFF		12 V
8* 1 (B)	-	-	-	-	-		0 V
11 (W)	Ground	Alternator signal	-	Ignition Switch ON	Charge Warning Lamp ON		2 V
					Charge Warning Lamp OFF		12 V
14 (V)	Ground	ACC power supply	-	Ignition Switch ACC	-		Battery voltage
16 (V)	Ground	Air bag signal	Input	Ignition Switch ON	Air bag Warning Lamp ON		-
					Air bag Warning Lamp OFF		-
17 (BR)	Ground	Meter Control Switch ground	-	-	-		0 V
18 (SB)	Ground	Trip/reset signal	Input	Ignition Switch OFF or ON	Trip/Reset Switch is pressed		0 V
					Other than the above		5.0 V
21 (B)	Ground	Steering Switch signal ground	-	-	-		0 V
22 (P)	Ground	Steering Switch signal A	Input	Ignition Switch OFF or ON	Keep pressing BACK Switch		0 V
					Keep pressing MENU UP Switch		0.5 V
					Keep pressing MENU DOWN Switch		1.2 V
					Keep pressing Voice Recognition Switch		2.1 V
					Keep pressing OK Switch		3.3 V
23 (W/B)	Ground	Steering Switch signal B	Input	Ignition Switch OFF or ON	Keep pressing VOLUME DOWN Switch		0 V
					Keep pressing VOLUME UP Switch		0.5 V
					Keep pressing TEL Switch		1.2 V
					Keep pressing display back Switch		2.1 V
					Keep pressing display next Switch		3.3 V
24 (L)	Ground	Washer Level Switch signal	Input	Ignition Switch ON	Washer Level Switch ON		0 V
					Washer Level Switch OFF		12 V
25 (LG)	Ground	Brake fluid level Switch signal	Input	Ignition Switch ON	Brake fluid level low		0 V
					Brake fluid level normal		12 V
26 (V)	Ground	Parking Brake Switch signal	Input	Ignition Switch ON	Parking brake applied		0 V
					Parking brake released		12 V
27 (G)	Ground	Passenger seat belt Warning signal	Input	Ignition Switch ON	When getting in the passenger seat. When passenger seat belt is fastened.		-
					When getting in the passenger seat. When passenger seat belt is unfastened.		-
28 (W)	Ground	Seat belt buckle Switch signal (driver side)	Input	Ignition Switch ON	When driver seat belt is fastened.		12 V
					When driver seat belt is unfastened.		0 V
30 (G)* 2 (SB)* 3	Ground	Manual mode signal	Input	Ignition Switch ON	Selector lever manual mode position		0 V
					Other than the above		12 V
31 (L)* 2 (G)* 3	Ground	Non-manual mode signal	Input	Ignition Switch ON	Selector lever manual mode position		12 V
					Other than the above		0 V
32 (BG)	Ground	Manual mode shift up signal	Input	Ignition Switch ON	Selector lever UP operation		0 V
					Other than the above		12 V
33 (P)* 2 (GR)* 3	Ground	Manual mode shift down signal	Input	Ignition Switch ON	Selector lever DOWN operation		0 V
					Other than the above		12 V
34 (BG)	Ground	Paddle shifter up Switch signal	Input	Ignition Switch ON	Paddle shift up operated		0 V
					Other than the above		12 V
35 (G)	Ground	Paddle shifter down Switch signal	Input	Ignition Switch ON	Paddle shift down operated		0 V
					Other than the above		12 V
36 (V)	Ground	Illumination control Switch signal (+)	Input	Ignition Switch OFF or ON	When illumination control Switch (+) is pressed		0 V
					Other than the above		5.0 V
37 (GR)	Ground	Illumination control Switch signal (-)	Input	Ignition Switch OFF or ON	When illumination control Switch (-) is pressed		0 V
					Other than the above		5.0 V
38 (R)	Ground	Vehicle speed signal (8-pulse)	Output	Ignition Switch ON	Speedometer operated [When vehicle speed is approx. 25 MPH (40 km/h)]		NOTE: The maximum voltage varies depending on the specification (destination unit). Courtesy of NISSAN NORTH AMERICA, INC.
41 (L)	Ground	CAN - H	-	-	-		-
42 (P)	Ground	CAN - L	-	-	-		-
43 (B)	Ground	Illumination control signal	Output	Ignition Switch ON	Lighting Switch 1ST position When meter illumination is minimum		Courtesy of NISSAN NORTH AMERICA, INC.
					Lighting Switch 1ST position When meter illumination is step 11		Courtesy of NISSAN NORTH AMERICA, INC.
					Lighting Switch 1ST position When meter illumination is maximum		0 V
44 (Y)	Ground	Fuel level sensor ground	-	Ignition Switch ON	-		0 V
45 (W)	Ground	Battery power supply	-	-	-		Battery voltage
46 (BG)* 2 (R)* 3	Ground	Ignition signal	-	Ignition Switch ON or START	-		12 V
47 (SB)	Ground	AV communication signal (H)	-	-	-		-
48 (LG)	Ground	AV communication signal (L)	-	-	-		-
51 (BR)	Ground	Fuel level sensor signal	-	Ignition Switch ON	Fuel gauge indication position	Full	Less than 98 Ω
						1/2	186 Ω
						1/4	232 Ω
						1/8	255 Ω
						Empty	More than 275 Ω
52 (B)	Ground	Ground	-	-	-		0 V

* 1: This harness is not used.

* 2: With 2.0L Turbo Gasoline Engine Models

* 3: With VR30DDTT Engine Models