LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> Steering Switch Signal A Circuit >> Component Inspection >> With ICC

With ICC

  1. CHECK STEERING SWITCH

    1. Remove Steering Switch. Refer to REMOVAL AND INSTALLATION .
    2. Measure the resistance between the Steering Switch connector.
      Steering Switch Condition Resistance
      (Approx.) Ω
      Terminal Terminal
      13 15 OK Switch is pressed 1982 - 2064
      VR Switch is pressed 708 - 738
      MENU DOWN Switch is pressed 314 - 328
      MENU UP Switch is pressed 118 - 124
      BACK Switch is pressed 0
      14 DISPLAY NEXT Switch is pressed 1982 - 2064
      DISPLAY BACK Switch is pressed 708 - 738
      TEL Switch is pressed 314 - 328
      VOL UP Switch is pressed 118 - 124
      VOL DOWN Switch is pressed 0
      GNSJSNIB0466GB-466Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace Steering Switch. Refer to REMOVAL AND INSTALLATION .