Inspection Procedure

Are camera lens and windshield contaminated with foreign materials?

YES (When the camera lens is contaminated with foreign materials.) 

Replace lane camera unit (Refer to REMOVAL AND INSTALLATION .) and GO TO STEP 2  .

YES (When the windshield is contaminated with foreign materials.) 

Clean windshield.

NO 

GO TO STEP 2  .

Check lane camera unit installation condition (installation position, properly tightened, a bent bracket).

Is it properly installed?

YES 

GO TO STEP 3  .

NO 

Install lane camera unit properly, and perform camera aiming.

Check vehicle height. Refer to WHEEL ARCH HEIGHT [2WD (Except VR30DDTT)], WHEEL ARCH HEIGHT [2WD (VR30DDTT)], WHEEL ARCH HEIGHT (AWD).

Is vehicle height appropriate?

YES 

INSPECTION END

NO 

Repair vehicle to appropriate height.