Diagnosis Procedure

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "AUTO LOCK FUNCTION" in "WORK SUPPORT" mode.
3. Check "AUTO LOCK FUNCTION" in "WORK SUPPORT".

   Refer to CONSULT FUNCTION (BCM - DOOR LOCK) .

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Set "MODE 1" in "AUTO LOCK FUNCTION".

1. Replace BCM. Refer to REMOVAL AND INSTALLATION .
2. Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .