LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension (2WD) (2.0L) (Except Hybrid) >> Removal And Installation >> Transverse Link >> Inspection And Adjustment >> Inspection After Removal >> Rotating Torque Inspection

Rotating Torque Inspection

  1. Move the ball stud at least ten times by hand to check for smooth movement.
  2. Attach mounting nut to ball stud. Make sure that rotating torque is within specifications with a preload gauge [SST: ST3127S000 (J-25765-A)] (A).
    G04876481Courtesy of NISSAN NORTH AMERICA, INC.
    Rotating toque : Refer to BALL JOINT .
    • If rotating torque exceeds standard range, replace transverse link assembly.
scientia non olet · About LEMON Manuals