LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension (2WD) (2.0L) (Except Hybrid) >> Removal And Installation >> Transverse Link >> Inspection And Adjustment >> Inspection After Installation

Inspection After Installation

  1. Check wheel sensor harness for proper connection. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
  2. Check wheel alignment. Refer to INSPECTION .
  3. Adjust neutral position of steering angle sensor. Refer to DESCRIPTION .
scientia non olet · About LEMON Manuals