Component Inspection (Heated Steering Wheel Relay)

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HEATED STEERING WHEEL RELAY CONTINUITY

Check continuity between heated steering wheel relay terminals.

CAUTION:

Connect the fuse between the terminals when applying the voltage.
To prevent damage, always observe the correct polarity.
Prevent short-circuit.

Heated steering wheel relay	Condition	Continuity
Terminal
3 - 5	Apply 12 V direct current between terminals 1 and 2.	Existed
	Other conditions.	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace heated steering wheel relay. Refer to Component Parts Location .