Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- To perform diagnosis, observe PRECAUTIONS FOR TROUBLE DIAGNOSIS .
- To repair harness, observe PRECAUTIONS FOR HARNESS REPAIR .
- INSPECTION START
Confirm the detected malfunction (result of "CAN Diagnosis").
Is there any malfunction at present or a malfunction history?
YES
Go to TROUBLE DIAGNOSIS FLOW CHART .
NO
GO TO STEP 2.
- DETECT THE ROOT CAUSE
With CONSULT
Check DTC of "MOTOR CONTROL".
Detected DTC Root cause DTC U0100, U0101, U0111, and U0293 - HEV system CAN line
(Short circuit or traction motor inverter branch line*)
- ECM
- HPCM
- TCM
- Li-ion battery controller
- Traction motor inverter
DTC U0100 - ECM branch line
- ECM
DTC U0101 - TCM branch line
- TCM
DTC U0111 - Li-ion battery controller branch line
- Li-ion battery controller
DTC U0293 - HPCM branch line
- HPCM and battery junction box
DTC U0111 and U0293 Main line between traction motor inverter and HPCM NOTE:* : If "EV/HEV" detects DTC U0110, check the traction motor inverter branch line first.
Intermittent malfunction. Check malfunctioning parts, according to the intermittent Incident. Refer to INTERMITTENT INCIDENT .
- HEV system CAN line