LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Hybrid Motor System (Diagnostic Trouble Codes (DTCS) P0A02-U1002) (Hybrid)) >> DTC Diagnosis >> DTC P3260: Configuration Value >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always power switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2. 

  2. CHECK DTC DETECTION

    G-20 With CONSULT

    1. Turn ignition switch ON and wait for 10 seconds or more.
    2. Check DTC.

    Is "P3260" detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals