Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONNECTION CONDITION
- Turn ignition switch OFF.
- Check the connection condition of the traction motor inverter harness connector.
Is the inspection result normal?
YES
GO TO STEP 2.
NO
Repair or replace damaged parts.
- CHECK DTC HIGH VOLTAGE SYSTEMS
- Turn ignition switch ON and wait for 10 seconds or more.
- Check DTC of the high voltage systems.
Were there any detected DTC related to a high voltage systems other than the traction motor inverter?
YES
Check DTC detected item.
NO
Replace the traction motor inverter. Refer to REMOVAL AND INSTALLATION .