LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Steering Control System (Diagnostic Trouble Codes (DTCS) C13D4-00 - U1010-49 And Circuit Diagnosis) (Hybrid)) >> DTC/Circuit Diagnosis >> DTC C13E2-00: Front Wheel Sensor Signal >> EPS/DAST 3 >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS

    G-20With CONSULT 

    1. Turn the ignition switch ON.
    2. Perform self-diagnosis for "ABS".

    Is any DTC detected?

    YES 

    Check the DTC. Refer to DTC INDEX .

    NO 

    GO TO STEP 2  .

  2. PERFORM SELF-DIAGNOSIS

    G-20With CONSULT 

    1. Turn the ignition switch OFF and wait for at least 10 seconds.
    2. Turn the ignition switch ON.
    3. Perform self-diagnosis for "EPS/DAST 3".

    Is DTC "C13C7 - 00" or "C13E2 - 00" detected?

    YES - 1 

    C13C7 - 00 is detected: Refer to DTC DESCRIPTION .

    YES - 2 

    C13E2 - 00 is detected: Replace steering force control module. Refer to REMOVAL AND INSTALLATION .

    NO