Component Inspection
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK STEERING SWITCH
- Disconnect spiral cable harness connector.
- Check the resistance between the spiral cable connector terminals.
Spiral cable (steering switch) Condition Resistance
(Approx.) ΩTerminal 14 17 BACK switch ON 1 MENU UP switch ON 119 - 123 MENU DOWN switch ON 315 - 327 Voice recognition switch ON 709 - 737 MENU OK switch ON 1, 983 - 2, 063 15 VOL DOWN switch ON 1 VOL UP switch ON 119 - 123 TEL switch ON 315 - 327 DISPLAY BACK switch ON 709 - 737 DISPLAY switch ON 1, 983 - 2, 063
Is the inspection result normal?
YES
INSPECTION END
NO
Replace steering wheel. Refer to REMOVAL AND INSTALLATION .