LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Tires, Wheels & Tire Pressure Monitoring System (TPMS) (Symptom Diagnosis & Removal And Installation) (Hybrid)) >> Removal And Installation >> Road Wheel Tire Assembly >> Inspection >> Aluminum Wheel

Aluminum Wheel

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
    1. Remove tire from aluminum wheel and mount on a tire balance machine.
    2. Set dial indicator as shown in the figure.
      G04128757Courtesy of NISSAN NORTH AMERICA, INC.
    3. Check runout, if the axial runout MARU-A-W or radial runout MARU-B-W exceeds the limit, replace aluminum wheel.
      Limit  
      Axial runout MARU-A-W : Refer to ROAD WHEEL .
      Radial runout MARU-B-W : Refer to ROAD WHEEL .
scientia non olet · About LEMON Manuals