Brake Fluid: Refilling
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If the brake fluid contacts the brake caliper assembly and disc rotor, quickly wipe it off.
- Check that there is no foreign material in the reservoir tank, and refill with new brake fluid.CAUTION:
- Never reuse drained brake fluid.
- Never allow oils other than brake fluid to enter the reservoir tank.
- Loosen the bleeder valve, slowly depress the brake pedal to the full stroke, and then release the pedal. Repeat this operation at intervals of 2 or 3 seconds until all brake fluid is discharged. Then close the bleeder valve with the brake pedal depressed. Repeat the same work on each wheel.
- Perform the air bleeding. Refer to BLEEDING BRAKE SYSTEM .