Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK UNLOCK SENSOR

Turn ignition switch OFF.
Disconnect front door lock assembly (driver side) connector.
Check continuity between front door lock assembly (driver side) terminals.

Front door lock assembly (driver side)		Condition		Continuity
Terminal		Condition		Continuity
3	4	Driver door	Unlock	Existed
3	4	Driver door	Lock	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace front door lock assembly (driver side).