LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Door & Lock (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Combination Meter Buzzer >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
    3. Touch "Key", "Knob" or "Take Out" to check that it works normally.

    Is the inspection result normal?

    Yes 

    Combination meter buzzer is OK.

    No 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals