Component Inspection

Check that door mirror motor does not trap foreign objects and does not have any damage.

Refer to DISASSEMBLY AND ASSEMBLY .

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Replace door mirror. Refer to REMOVAL AND INSTALLATION .

1. Turn ignition switch OFF.
2. Disconnect door mirror connector.
3. Apply 12V to each power supply terminal of door mirror motor.

   Door mirror			Operational direction
   Connector	Terminal
   	(+)	(-)
   D56 (Driver side) D57 (Passenger side)	10	11	RIGHT
   	11	10	LEFT
   	12	10	UP
   	10	12	DOWN

Is the inspection result normal?

YES 

INSPECTION END

NO 

Replace door mirror. Refer to REMOVAL AND INSTALLATION .