Component Function Check

1. Select "TILT PULSE" in "Data monitor" mode with CONSULT.
2. Check tilt sensor signal under the following conditions.

   Monitor item	Condition		Value
   TILT PULSE	Steering tilt	Operate (up)	Change (increase)*1
   		Operate (down)	Change (decrease)*1
   		Release	No change*1

   ^*1 : The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .