LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Tilt & Telescopic Switch Ground Circuit >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

  1. CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect tilt & telescopic switch connector.
    3. Check continuity between tilt & telescopic switch harness connector and ground.
    Tilt & telescopic switch Ground Continuity
    Connector Terminal
    M121 1 Existed

    Is the inspection result normal?

    YES 

    GO TO STEP 2. 

    NO 

    Repair or replace harness.

  2. CHECK INTERMITTENT INCIDENT

    Check intermittent incident.

    Refer to INTERMITTENT INCIDENT .

    INSPECTION END

scientia non olet · About LEMON Manuals