Diagnostic Test

CHECK TELESCOPIC SWITCH

Turn ignition switch OFF.
Disconnect tilt & telescopic switch connector.

Check continuity between tilt & telescopic switch terminals.

Telescopic switch		Condition		Continuity
Terminal		Condition		Continuity
1	2	Telescopic switch (forward)	Operate	Existed
	2	Telescopic switch (forward)	Release	Not existed
	3	Telescopic switch (backward)	Operate	Existed
	3	Telescopic switch (backward)	Release	Not existed

Is the inspection result normal?

YES

INSPECTION END

NO

Replace tilt & telescopic switch. Refer to REMOVAL AND INSTALLATION .