Component Inspection

CHECK MIRROR SWITCH

Turn ignition switch OFF.
Disconnect power window main switch (door mirror remote control switch) connector.
Check continuity between power window main switch (door mirror remote control switch) terminals.

Power window main switch (door mirror remote control switch)		Condition		Continuity
Terminal		Condition		Continuity
24	7	Mirror switch	LEFT	Existed
24			Other than the above	Not existed
25			DOWN	Existed
25			Other than the above	Not existed
26			UP	Existed
26			Other than the above	Not existed
27			RIGHT	Existed
27			Other than the above	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace power window main switch (door mirror remote control switch). Refer to REMOVAL AND INSTALLATION .