Component Inspection

CHECK CHANGEOVER SWITCH

Turn ignition switch OFF.
Disconnect power window main switch (door mirror remote control switch) connector.
Check continuity between power window main switch (door mirror remote control switch) terminals.

Power window main switch (door mirror remote control switch)		Condition		Continuity
Terminal		Condition		Continuity
23	7	Changeover switch	LEFT	Existed
23			Other than the above	Not existed
28			RIGHT	Existed
28			Other than the above	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace power window main switch (door mirror remote control switch). Refer to REMOVAL AND INSTALLATION .