Inspection In Auto Active Test Mode
When auto active test mode is actuated, the following operation sequence is repeated 3 times.
| Operation sequence | Inspection location | Operation |
|---|---|---|
| 1 | Front wiper motor | LO for 5 seconds → HI for 5 seconds |
| 2 |
|
10 seconds |
| 3 | Headlamp | LO for 10 seconds →HI ON ==> OFF 5 times |
| 4 | A/C compressor (magnet clutch) | ON ==> OFF 5 times |
| 5 | Cooling fan * | LO for 5 seconds → HI for 5 seconds |
* : Outputs duty ratio of 50% for 5 seconds → duty ratio of 100% for 5 seconds on the cooling fan control module.