LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lighting System (Led Headlamp) (Introduction, Wiring Diagrams And Basic Inspection) (Except Hybrid) >> System Description >> Diagnosis System (High Beam Assist Control Module) >> Consult Function (High Beam Assist) >> Data Monitor

Data Monitor

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item
[Value/Unit]		 Description
HBA SYSTEM STATUS
[ERROR/OK]		 Displays the status of the high beam assist system condition signal which the high beam assist control module transmits to BCM via CAN communication
  • ERROR: Operation prohibited status (DTC detected)
  • OK: Normal status
HIGH BEAM ASSIST REQUEST
[NO REQ/LOW/HIGH/NOT RE]		 Displays the status of the high beam assist request signal which the high beam assist control module transmits to BCM via CAN communication
  • NO REQ: Headlamp (HI/LO) operation not requested
  • LOW: Headlamp (LO) operation requested
  • HIGH: Headlamp (HI) operation requested
  • NOT RE: During startup
IMAGE SENSOR TEMP
[°C]		 Displays the image sensor temperature received from the image sensor
scientia non olet · About LEMON Manuals