Values On The Diagnosis Tool
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
CONSULT MONITOR ITEM
| Monitor item | Condition | Value/Status (Approx.) |
|
|---|---|---|---|
| HBA SYSTEM STATUS | Ignition switch ON | DTC is detected by the high beam assist control module | ERROR |
| Other than the above | OK | ||
| HIGH BEAM ASSIST REQUEST | Ignition switch ON | When the high beam assist system operation permission conditions are not satisfied | NO REQ |
| During headlamp (LO) operation activated by high beam assist system | LOW | ||
| During headlamp (HI) operation activated by high beam assist system | HIGH | ||
| Immediately after turning the ignition switch ON | NOT RE | ||
| IMAGE SENSOR TEMP | Ignition switch ON | Equivalent to in - vehicle temperature | |