LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lighting System (Led Headlamp) (Introduction, Wiring Diagrams And Basic Inspection) (Except Hybrid) >> Ecu Diagnosis Information >> AFS Control Unit >> Reference Value >> Physical Values

Physical Values

Terminal No.
(Wire color)
Description Condition Value
(Approx.)
+ - Signal name Input/
output
1
(L)
Ground CAN - H Input/
output
- -
6
(BR)
Ground Height sensor signal Output Vehicle rear height Unloaded vehicle condition 2.44 V
Low (Leveling operation downward edge) 1.78 V
8
(GR)
Ground Swivel actuator LIN signal Input/
output
Ignition switch ON
GNSJMLIA4324GB-324Courtesy of NISSAN NORTH AMERICA, INC.
11
(B)
Ground Ground - Ignition switch ON 0 V
12
(R) * 1
(W) * 2
Ground Ignition power supply Input Ignition switch ON 9 - 16 V
13
(P)
Ground CAN - L Input/
output
- -
19
(P)
Ground Swivel actuator ground Input Ignition switch ON 0 V
21
(LG)
Ground Height sensor power supply Output Ignition switch ON 4.45 - 6.25 V
22
(SB)
Ground Aiming motor drive signal Output Headlamp leveling Unloaded vehicle condition 3.75 V
Leveling operation downward edge 8.01 V
23
(GR)
Ground Height sensor ground Input Ignition switch ON 0 V
24
(B)
Ground Aiming motor ground Input Ignition switch ON 0 V

* 1 : Without 2.0L turbo gasoline engine models

* 2 : With 2.0L turbo gasoline engine models