LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lighting System (Led Headlamp) (Introduction, Wiring Diagrams And Basic Inspection) (Except Hybrid) >> Basic Inspection >> Configuration (High Beam Assist Control Module) >> Work Procedure >> Diagnostic Test

Diagnostic Test

  1. WRITING MODE SELECTION

    G-20 CONSULT Configuration

    1. Turn ignition switch ON.
    2. Select "Configuration" mode of "HIGH BEAM ASSIST" using CONSULT.

    When writing saved data 

    GO TO STEP 2  .

    When writing manually 

    GO TO STEP 3  .

  2. PERFORM "WRITE CONFIGURATION - CONFIG FILE"

    G-20 CONSULT Configuration

    Perform "WRITE CONFIGURATION - Config file".

    WORK END

  3. PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"

    G-20 CONSULT Configuration

    1. Select "WRITE CONFIGURATION - Manual selection".
    2. Select "SETTING".
    3. When "COMMAND FINISHED", touch "End".

    WORK END

scientia non olet · About LEMON Manuals