DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION:

Before performing the following procedure, confirm that fuel level is enough.

GO TO STEP 2 .

PERFORM DTC CONFIRMATION PROCEDURE

Set the vehicle to READY with engine cool condition.

Does the engine start?

YES

INSPECTION END

NO

Proceed to DIAGNOSIS PROCEDURE .