DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK AIR BAG MODULE
Check that the air bag modules are not inflating.
Is air bag module inflating?
YES
Refer to WHEN SRS IS ACTIVATED IN A COLLISION .
NO
GO TO STEP 2 .
- PRECONDITIONING
- Turn power switch OFF and wait at least 20 seconds.
- Make sure that 12V battery voltage is 11 V or more.
GO TO STEP 3 .
- PERFORM DTC CONFIRMATION PROCEDURE
Turn power switch ON and wait at least 5 seconds.
Is DTC detected?
YES
Proceed to DIAGNOSIS PROCEDURE .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: INSPECTION END