DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Set the vehicle to READY.
- Touch A/C switch ON and wait at least 1 hour.
- Turn ignition switch OFF and wait at least 1 minute.
- Turn ignition switch ON.
- Check DTC.
Is DTC detected?
YES
Proceed to DIAGNOSIS PROCEDURE
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: INSPECTION END