DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM COMPONENT FUNCTION CHECK
With CONSULT
- Turn ignition switch ON.
- Select "ACTIVE TEST" mode of "HV BATTERY" using CONSULT.
- Perform "HV BATTERY COOLING FAN", and check that the battery cooling fan operation.
NOTE:Use component function check to check the overall function of the battery cooling fan. During this check, a DTC might not be confirmed.
Is the inspection result normal?
YES
Proceed to DIAGNOSIS PROCEDURE .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: INSPECTION END