LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Hybrid Motor System (Diagnostic Trouble Codes (DTCS) P2122-P31FF And Circuit Diagnosis) (Hybrid)) >> DTC / Circuit Diagnosis >> Brake Switch >> Component Inspection (Stop Lamp Off Relay 2)

Component Inspection (Stop Lamp Off Relay 2)

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK STOP LAMP OFF RELAY 2

    1. Turn ignition switch OFF.
    2. Remove stop lamp OFF relay 2.
    3. Check the continuity between stop lamp OFF relay 2 terminals as per the following condition.
      Stop lamp OFF relay 2 Condition Continuity
      + -
      Terminal
      5 3 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace stop lamp OFF relay 2.

scientia non olet · About LEMON Manuals