Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ICC BRAKE HOLD RELAY

Apply battery voltage to ICC brake hold relay terminals 1 and 2, and then check for continuity under the following conditions.

Courtesy of NISSAN NORTH AMERICA, INC.

Terminal		Condition	Continuity
3	5	When the battery voltage is applied	Existed
3	5	When the battery voltage is not applied	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace ICC brake hold relay.