Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK A/T INDICATOR

CAUTION:
Always drive vehicle at a safe speed.
1. Start the engine.
2. Check the actual selector lever position ("P", "R", "N" and "D") and the indication of the shift position indicator mutually coincide.
3. Drive vehicle in the manual mode, and then check that the actual gear position and the indication of the shift position indicator mutually coincide when the selector lever is shifted to "UP (+ side) " or "DOWN (- side) " side (1GR ==> 7GR).
Is the inspection result normal?

YES

INSPECTION END

NO

Go to DIAGNOSIS PROCEDURE .