Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SHIFT LOCK SOLENOID
Apply voltage to terminals 8 and 4 of A/T shift selector connector, and check that shift lock unit is activated.
CAUTION:- Connect the fuse between the terminals when applying the voltage.
- Never cause shorting between terminals.
A/T shift selector Condition Status + (fuse) - Terminal 8 4 - Selector lever in "P" position.
- Apply 12 V direct current between terminals 8 and 4.
Shift lock unit operates Can the lock plate be moved up and down?
YES
INSPECTION END
NO
Replace A/T shift selector assembly. Refer to REMOVAL AND INSTALLATION .