Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SUB ELECTRIC OIL PUMP RELAY

Disconnect sub electric oil pump relay. Refer to COMPONENT LOCATION .
Apply 12V direct current between sub electric oil pump relay terminals 1 and 2.
CAUTION:
- Never make the terminals short.
- Connect the fuse between the terminals when applying the voltage.

Check the continuity between sub electric oil pump relay terminals 3 and 5.

Sub electric oil pump relay	Condition	Continuity
Terminal	Condition	Continuity
3 - 5	Apply 12 V direct current between terminals 1 and 2.	Existed
3 - 5	Does not apply 12 V direct current between terminals 1 and 2.	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace sub electric oil pump relay.