Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK MANUAL MODE SWITCH
Check continuity between A/T shift selector connector terminals.
A/T shift selector Condition Continuity Terminal 1 - 4 Selector lever is shifted to manual shift gate side Existed Other than the above Not existed 2 - 4 Selector lever is shifted to - side Existed Other than the above Not existed 3 - 4 Selector lever is shifted to + side Existed Other than the above Not existed 5 - 4 Selector lever is shifted to manual shift gate side Not existed Other than the above Existed Is the inspection result normal?
YES
INSPECTION END
NO
Repair or replace A/T shift selector. Refer to REMOVAL AND INSTALLATION .